Automatic wadding machine INVENSPREAD MN1 BU

This equipment BU after service

Automatic wadding machine INVENSPREAD MN1 allows you to lay a wide range of fabrics, including elastic, as well as heavy fabrics such as jeans.

The machine is equipped with cradle, belt-fed, drive to all wheels, an operator's platform, the Machine can be manufactured in different width 160-320 cm

The main advantages of automatic spreading machine INVENSPREAD MN1:

Eliminate a manual laying out, the weakest place in the production chain

Increase the speed of laying out, and consequently performance

Cost reduction due to the work of only one operator

Very rapid formation of flooring for small orders

Stable quality of laying out, regardless of the length of the deck,

The different tension of the material in different layers (which is a problem when manually nastilanie)

Easy, intuitive controls that allow you to work not even qualified personnel.

Reliability and durability, ensure low maintenance costs.

Specification wadding machine INVENSPREAD MN1

• CRF – lullaby flow by using belts, allowing easy loading and unloading of the roll
• AEC – Automatic alignment of the edge
• STD – Standard way of laying out ( face up with the cutting of each layer)
• ZZG – Set for laying out ZIGZAG
• IFS – Intelligent feeding system with dynamic measurement of material tension, allowing you to control the tension of the material
• The NTF is the System of unwinding tension – unwinding and nastilanie fabric without tension
• Rapid restructuring of the side of laying out (face up/face down)
• Automatic rewind with the smoothing of the edges
• Automatic machine stop at the end of the material with audible signal
• Programmable stops at a predetermined length, for quick cutting out defective pieces and continue.
• The software counts the length and material, with a report
• ARC – Automatic cutting of material by means of a circular knife
• ACL – Automatic adjustment of the cutting device at the height of the flooring.
• ODP – a Platform for the operator, which can be folded up and locked
• LCD "touch screen" ( prospect LG), allowing easy management of operating parameters
• 10PR – Ability to memorize up to 10 profiles for different tissues
• ASS – Automatic machine stop when there is obstacles
• Wide seamless strap in the cradle, which is in contrast narrow straps prevents the edge of fabric under it
• Goes well with most deck tables. The most recommended table with 30mm thick worktops with or without boost.

Technical specification:

Machine model: MN1

Materials used: textiles, knitwear, denim, elastic , etc.

Fabric width: 200 cm

Maximum roll diameter: 450 mm

The speed of laying out: 0-100 m/min with speed control (depends on material)

The height of laying out: 250 mm Maximum height of laying out cutting device / 220 mm Maximum height of laying out in nastilanie ZIGZAG / 200 mm the Maximum height of the laying out of the stocking

Roll weight : 120 kg max.

Download roll: lightweight loading

DRIVES

The basic laying out of the motor : 0.75 kW 1500 rpm AC motor with reducer (PGR Drive Technologies)

The movement of the cradle left/right: 0.18 kW 1500 rpm min AC motor with reducer (WAT)

Promotion of the cradle: 0.75 kW 3000 rpm AC motor with reducer (PGR Drive Technologies)

Lifting motor: 0.19 kW 24V DC motor with gearbox (KORMAS)

Cutting edge: Clack Motor (24V DC),

The movement of the knife (24V DC) with reducer,

Knife drive (24V DC) (Kormas)

Control methods: automatic and manual control

Control edge: using 2 photo sensors

The stop function at the end of the material: automatic stop with photo sensor

Safety device: 2 image sensor that provides a stop when somebody is standing in front of or behind the car

Height photo sensor: photo sensor, which rises as the height growth of laying out

Operating system: special software with the computer LG

Control system:monitor LG 5.7 inch touchscreen

Installation is possible from the control panel:

The number of layers

Length of laying out

The speed of laying out (forward /backward)

Installation tension

The use of a password

The choice of laying out (one-way or ZIG.ZAG)

The installation tension at the beginning of the end

Off safety sensor when necessary

The disconnection of the sensor material when necessary

SPREADING TABLES with boost

• 18 mm Laminated chipboard
• The base of the table
• The rails and guides for the platform operator
• Guide for overlock machines from both sides of the table
• 30 m timing belt for incoder
• Guide to power spreading machine.
• 1.1 kW 4 stations boost

The rate is excluding VAT

Installation and staff training included.

It is possible to buy directly in Belarus without cost of shipping and customs

The price shown is for table and 6 meters, loader, spreading machine and the carriage

12 month warranty.