CH-12 car for Garyachi Rizannya Stropyv right І pіd kutu

CH-120 & nbsp; & nbsp; car for hot cutting of slings, satin, byard tape, synthetic and rubberized Velcro, zipper, elastic bands, laces and other types of synthetic tapes from bobin, which requires the cutting of the cut. The machine is equipped which is not violated by the structure of the material. The edges of the product are very well sealed and do not bloom. This model of the knife works exclusively in hot mode, since the knife is stupid and cuts the tape by melting. & nbsp; you can cut the sling in 6 modes: a straight line at an angle of 90 degrees, a scythe with the left tilt, a scythe with the right tilt, acute as a triangle, trapezoid and parallelepiped. & nbsp; Features: High performance - 120 - 140 pcs/min, depending on the speed of pulling and the length of the segment; for cutting the elastic band, the compensation function is provided - the error for elasticity - a separate button for an elastic band of different elasticity 1 - 6; width of cutting - up to 90 mm; One bobbin can be corrected correctly to cut it at different angles, but you can also season two identical bobbins to cut at an angle of 90 degrees; cutting length - 1 mm ~ 9999 mm; you can set a certain amount for cutting 1 - 9999 pcs; knife; In the form of the letter V - for high -speed cutting with simultaneously melting the edge of the tape; the temperature of the blade is 450 ° C - smooth control - automatic control - works autonomously after the introduction of the desired length, type of angle, speed and quantity & nbsp; the machine stops when the tape ends; automatic memorization of the settings Cars, even if power is turned off from the network; in memory of the machine you can make 10 templates, for example: the 1st template - 10 segments of 10 cm, under the direct UG scrap at speed 2; 2nd template - 10 segments of 12 cm at an angle of 45 degrees with the left inclination at speed 3; etc. Gabarit dimensions & nbsp;- 32 × 40 × 31 cm (20.5 / 26 kg); made in China. You can buy & nbsp; car for hot cutting & nbsp; CH-12