Siruba T828-42-127KL/C two Needle machine to perform pocket

Presented to your attention industrial sewing machine to perform pocket

Needle machine to perform pocket "in the frame" pocket "with leaves". for light and medium materials. Installed on the machine set of needles with a distance of 12.7 mm. Automatic features: needle positioner, trim the upper and lower automatic thread length control slit pocket.

New development of the Company"Kaulin Mfg. Co.Ltd" successfully installed at several major factories of Ukraine and will help to achieve the combination of low equipment costs and achieve high technological level of production.

Currently, this is the solution to ensure efficient and quality production of the pocket in the frame. It is based on is known for a long time technological solution for processing the pocket the needle on a lockstitch machine. Based on advanced technical level in the form of machines T828-42-127KL\C "SIRUBA" it allows you to bring this technology on labour input for processing on automatic equipment with guaranteed quality assurance.

When machining the pocket in the frame filling the Director of otacek, whether in the form of a single strip requires minimal costs. The guide wire ensures their formation with the necessary for further processing of the increased allowance at the lower piping. It guarantees an exact match widths obcutek the distance between the two lines of connection. The proposed model is the distance equal to ½ inch, most suitable for Trouser range, but can be applied to jackets made of materials with low and medium fall.

Direct primaqiune of obcutek controlled by the automatic machine. It provides the formulation of the clips with further insertion of the knife provides it off at the required distance from the end of obrazek and the subsequent production of the final clips.

Process automation primaqiune allows to guarantee the exact conformity of the cut lengths of the connecting lines.

Consistent use of the needle of the machine is included in the delivery set appropriate guides for the pocket in the frame and pockets with leaflets and rational set of automation components ensures compliance with all criteria of high-quality pocket.

Given are the width of otacek, the appropriate distance and parallelism of the connecting lines. The length of obcutek guaranteed to match the beginning and end of the lines with the required clips and the corresponding width of the frame cut between the lines.

Main features:

• The number of needles - 2
• The distance between the needle - 12.7 mm
• Stitch length - 4 mm
• Needle type - DPX5 #14
• Speed - 4000 rpm
• Height of presser foot lift manual. - 7 mm
• Height of presser foot lift auto. - 10 mm
• Auto - needle positioner, trim of the upper and lower threads automatically presser foot lift
• Manufacture Taiwan

To buy Siruba T828-42-127KL/C add product to cart.