Promov Promoslov Schwein Machine GC 6890-HD4 s with automatics for the middle-sowned tissue tissan Iz Zbilhennya bushings

Typical GC6890HHD4-industrial straight-line sewing machine with automatic function of thread cutting, linen lifting, mounting. The machine is intended for operation in medium and heavy materials. The length of the stitch is adjustable from 1 to 7mm. The sewing speed of up to 4000 rpm is equipped with a modern built -in energy -saving servomotomatomniki of 550 watts. The sensory control panel is built into the head, this will greater and accelerate the process of changing operation parameters as well as the programming of the machine. An intuitive sensory interface panelip will quickly master the basic principles of work. The next functions are available on the panel: turning on and off the needle positioning. The luggage and disconnecting of the thread slide, after cutting the thread with the sincere electromagnets, the thread is fixed and does not jump out of the needle. The inclusion and disconnection of the automatic threading of the thread. The speed control. Work programming on a given template. This is useful when the machine is established in the stream at a specific technological operation. For example, setting up the patch pocket. Where for each line there is a capacity of set a certain number of stitches. The machine is equipped with an automatic lubricant system. The basic set of the machine includes the following options: LED backlighting of the working area. A built -in Spileener with a clamp of the thread, there is no necessity of gingerbread winding. The line of straight winding of the thread helps to avoid the threads of the thread. The electronic knee lift, which facilitates the lifting of the paw with the knee. Technical characteristics: Programming of the machine: built -in sensory display. Raise of the paw: automatic. Fent: automatic. Thread pruning: automatic, using two round knives threading of the thread. Failure capture: automatic. Sleeves departure: increased (300 x 136 mm.) Car speed: up to 4000 rpm. Speed ​​adjustment: there is a stitch length: up to 7 mm. Raising the paws: automatic, up to 16 mm stroke leader: 35mm. Fighting materials: Average/heavy motor power: 550 watts backlight: Built-in positioning of the needle: There is a needle and No.: 134/DP*5 100-160 lubrication of machine mechanisms: automatic. Type of shuttle: standard vertical. Bencock marking: 7.94ATR operating voltage: 220 volts.