Promov Promoslov Schwein machine GC 6890-MD4 W. Automatic

Typical GC6890-MD4-industrial straight-line sewing machine with automatic function of threading of the thread, lifting of the foot, fixing. The machine is intended for operation in medium and heavy materials. The length of the stitch is adjustable from 1 to 5mm. The sewing speed of up to 4500 rpm is equipped with a modern built -in energy -saving servomotomatomniki of 550 watts. The sensory control panel is built into the head, this will greater and accelerate the process of changing operation parameters as well as the programming of the machine. An intuitive sensory interface panelip will quickly master the basic principles of work. The following functions are available on the panel: the choice of automatic stoop with different number of stitches in the fixing. The inclusion and shutdown of the needle positioning. The liner and shutdown of the thread slide, after cutting the thread with the spray of the electromagnets, the thread is fixed and does not jump out of the needle. The inclusion and shutdown of the automatic trimming of the thread. The speed control. Programming work on a given template. This is useful when the machine is employed in the stream at a particular technological operation. & nbsp; for example, setting up a patch pocket. Where for each line there is a capacity of set a certain number of stitches. The machine is equipped with an automatic lubricant system. The basic set of the machine includes the following options: LED backlighting of the working area. A built -in Spileener with a clamp of the thread, there is no necessity of gingerbread winding. The line of straight winding of the thread helps to avoid the threads of the thread. Electronic knee lift that facilitates the lifting of the paw with a knee. Technical characteristics: Programming of the machine: Built -in touch display. Lap luna: automatic: automatic. Cutting. Free cut: Automatic, using two round knives of the thread. threads: automatic. Sleeves departed: increased (300 x 136 mm.) Car speed: up to 5000 rpm. Speed ​​speed: eat a stitches: up to 5 mm paw: automatic, up to 16 mmutor of the needlewoman: 31.8 mm. : Medium/heavyness of the motor: 550 Watt backing: built-in positioning needle needle DB*1 # 65-110 Summar of machine mechanisms: automatic. Tip shuttle: Standard vertical. Benging shuttle: 7.94btrous voltage: 220 volts.